5 methods to solve vibration motor frequent trip problem

Almost everyone knows the basic operation of vibration motor, but there are some points we need notice in the process of operation,especially the vibration motor frequent trip problem, according to our technical personnel’s experience, now we introduce some methods to avoid the trip for your reference:
1.Capacity unconformity or aging of vibration motor air switch and overcurrent protective device, just change the switch will solve the problem.
2. The wire cable skin of vibration motor is broken ,this is mostly due to wear and tear during long period use,it can be wrapped with tape.
3. Bearing damages or lacks oil,lead to overload trip.Thus we should replace the bearing timely.
4. Vibration motor power supply doesn’t work,or circuit breaker gets aging.
5. The magnetic circuit performance of vibration motor decline,causing too much current.
The above several problems are relatively simple to handle,according to the corresponding reasons, users themselves can solve them through adopting corresponding methods. If the trip of vibration motor is not caused by the above several reasons, please do not hesitate to contact with us,our engineer will solve the problem for you.

How to improve the efficiency of screening?

The way to improve the screening efficiency is in the list:

• We should improve the sieve plate opening rate, because of high opening rate is conducive to improve the sieving effect.
• If conditional word, we can add a fixed screen into the feeding end for coarse mesh.
• To dry screening,we should strictly control the moisture, when the water is on the high side,then can consider to ingredients sieve.
• Conditional word,also can consider to adjust the screen Angle, the proper Angle is beneficial to reduce the thickness of the material, thin layer material screening.
• Conditions permitting, wet screening, this is the most effective way to improve the sieving effect.
• Decrease the rate of screen batter hole, can consider to choose the cleaning sieve plate, such as the spring rod type screen surface or add prevent blockage device screen below.
• Changing the material, the material must be along the full screen width, be sure to make full use of the screen surface.
• For circular vibrating screen, can consider to adjust the weight method to improve the sieving effect.
  
  
  
  

Improve dry or wet screening efficiency of vibrating screen

Following methods can improve screening efficiency of vibrating screen:

1.For dry screening,we should strictly control the water content,for material with high water content,please consider screening with ingredients.
2.Reduce the of plugged hole,we can consider using the self-cleaning sieve plate,for example,for spring rod type screen mesh surface,we can add a prevent blockage device below the screen.
3.Improve the aperture percentage,high aperture percentage is beneficial to improve the screening effect.
4.Adjust the feeding way.Material can be fed according to the sieve surface width and ensure the sieve surface can be fully utilized.
5.If possible,please consider the dip angle of the screen machine,suitable angle is beneficial to reduce the thickness of material and achieve thin material screening.
6.For circular vibrating screen,we can consider adjusting the balance weight to improve the screening effect.
7.If possible, coarse screening before feeding material.
8.If possible, we can adopt wet screening,it’s the most effective way to improve the screening effect. 

What should we know about when we choose screw conveyor?

In our day life,we will use screw conveyor frequently.In order to we can send a detailed news about the thchnical parameters and requirements of machine.In there,our company-Henan pingyuan mining machinery will list the factors about selecting a screw conveyor of manufacturers to provide technical parameters.
The include:

In this,we can save time and money.also,the manufacturer will quickly according to your required parameters for selection and quotation.

What factors affect vibrating screen purchase

Please consider the following factors when purchase vibrating screen
A.Physical property of the material
Including material particle size, shape, moisture content, bulk density ,property ,etc. When the particle size is fine and mesh size is small, the screen efficiency will be lower, we need to select larger model for same capacity; when the moisture content is big, in general, the screen efficiency will be lower. However,if the mesh size is bigger, the influence of moisture content will be less; when the material with corrosion property, the material contacts parts usually need to be SUS 304 or whole machine is SUS304.

B.Screen surface character and structure
In general, if the material do vertical movement on the screen surface (such as linear vibrating screen,etc), the screen efficiency will be higher and the capacity is larger. If the material do reciprocating movement on the screen surface (such as gyratory screen,etc),the screen efficiency and capacity will be lower.
For certain material, the screen efficiency and capacity rate are determined by the mesh size. The screen efficiency is determined by the screen surface length, the longer screen surface length is, the higher screen efficiency will be; the capacity rate is determined by the screen surface width, the bigger screen surface width is, the higher capacity rate will be. 
C.Production condition
The screen efficiency will be lower when the load on the vibrating screen is big.Uniform feeding material also has a big influence on the screen efficiency. (For this question, PK Machinery designs a distributor above the inlet of vibrating screen to achieve uniform material feeding).
Only when we take all above factors into consideration,will we get a suitable vibrating screen that can meet our production efficiency. 

Factors affecting the efficiency of screw conveyor

Main factors influencing the efficiency of screw conveyor:

1. Material viscosity, easy caking. Material viscosity,material is prone to sticking to the blades and conveyoron the inner wall, making large resistance change in thematerial handling process, a direct impact onproductivity.

2. Spiral pipe diameter size. Under the same conditions,of large diameter conveyor transmission efficiency thandiameter small throughput and higher efficiency.

3. Angle of screw conveyor and transmission distance.

4. Material particle size, temperature, moisture,abrasion and corrosion. Specific parameter can refer to:technical parameters of screw conveyor and conveying calculation formula.

5. Screw conveyor speed. Screw conveyor speed relates to the motor of the conveyor's size. Screw conveyor speed has a close relationship with material properties. High speed screw conveyor Assembly is strict, but also better balance.

Basic Type of Scraper and Chain Used for Buried Scraper Conveyor

As the traction and load-bearing components of buried scraper conveyor, scraper chain subassembly is generally welded by different types of scrapers and chains, or one-piece casting.
Subject to the gravity and conveyor trough, the material is transported by the thrust from scraper chain subassembly, as well as the friction and lateral pressure caused in conveying process. Therefore, the appropriate selection of scraper & chain influences the conveying and operating efficiency greatly.

According to different material property, conveyor trough width and capacity, various types of scraper and chain are chosen to meet the actual operation requirements.
1. The basic type of scraper
Scraper can be classified according to their shapes. There are flat scraper (T-type), framework scraper (U-type, V-type, H-type), side-pull scraper (L-type) and solid angle shape scraper, etc.
U-type and V-type scrapers are most commonly used, and suitable for horizontal, inclined and vertical transmission. 
T-type and L-type scrapers apply to horizontal transmission.
H-type scrapers are appropriate for square cross section conveyor.
Other special type of scraper, such as cleaner scraper, which bottom margin and broadside are installed with rubber sheet, neoprene sheet, leather sheet or canvas sheet, is used to remove the residue remained in the conveyor casing. In order to prevent most viscous material bonded in the inner wall of casing, the manufacturer can install a cleaner scraper every 5 ~ 10 chain link. 
2. The basic type of chain
There are three types of chains used for the buried scarper conveyor, bush roller chain, die forging chain and double chain.
Bush roller chain has the features of flexible rotation, low friction in meshing process, low specific pressure and small abrasion. While the chains must be replaced in pairs because of its heavier weight.
The characteristics of die forging chain are simple structure, light weight, high strength, reliable operation and convenient assembling & dismantling. 
The pitch of double chain is big, so it has the advantages including high carrying capacity, reliable operation and convenient assembling & dismantling. But the disadvantages are heavy weight, and can’t be designed according to equal strength.  

What Factors that Affect the Screw Conveyor Conveying Efficiency ?

The factors are listed as follows:
1.The material has great viscosity and is easy to agglomerate. 
The viscous material is easy to stick on the screw blade and the inner wall of the screw conveyor, which will increase the resistance in the process of conveying, and directly affect the production efficiency.
2.The diameter size of the screw pipe.
Under the same conditions, conveying efficiency of the screw conveyor with larger diameter is higher than the conveyor with small diameter.

3.The dip angle and transportation distance of screw conveyor.
4.The particle size, temperature, moisture, abrasion and corrosion of the material.
Specific parameters can refer to: Screw conveyors and conveying technical parameters calculation formulas.
5.The rotate speed of the screw conveyor.
The rotating speed of the screw conveyor is related to the power of conveyor motor . The working speed of screw conveyor has a close relationship with the material characteristics. High speed screw conveyor requires strict assembly, and demands a better balance. 
Further information,please click:www.pkmachinery.com

Introduction of Circular Vibrating Screen

Circular Vibrating Screen is a kind of new and highly effective vibrating screen that does circular vibrations and has multiple layers. Circular vibrating screen adopts cylinder postures eccentric block to produce strong exciting force. Its main body is connected by high strength screw bolts. A circular, elliptical vibration motion is created in order to sieve the materials efficiently. It is composed of screen box, screen mesh cloth, suspension (or support) device, underframe and motor.

circular virating screen

► Working principle
Circular vibrating screen separator uses eccentric block(YK type)/eccentric shaft(YA type) to produce strong exciting force, due to the unbalanced centrifugal force of inertia of the weights on the exciter, screen box vibrates, it can obtain different amplitudes by changing the exciter eccentric weight.
► Application
Ore circular vibrating screen is available for smelting , quarry , coal preparation, ore dressing, energy, power, chemical industry,construction material.
► Features
   1.Simple structure, easy maintenance, high production efficiency
   2.Using large clearance bearings and lubricated with thin oil, little noise and long service life
   3.Sieve beam and screen box adopts high strength bolt connection, no welding processing
   4.Small amplitude, high frequency, large dip angle structure to enable high screening efficiency and great handling capacity.

circular vibrating screen

► Advantage

    A.Common features and performance of our Circular Vibrating Screen

        1.High screening efficiency 

        2.Strong vibration force created

        3.Adoption of punching sieve or steel made screening mesh in order to prevent blockage.

        4.Screen body connected by using high strength screw bolts.

        5.Adopts spring steel woven mesh or perforated sieve-plate, which is helps to prolong the service life and prevent blockage.

        6.Rubber vibration spring is used to reduce noise pollution and provide smooth vibration operation. 

 

    B.Drive and Mounting of Circular Vibrating Screen
 

 Drive is by electric motor and cardan shaft to the main drive shaft equipped with a single unbalance weight where required additional v-belt can be provided. The drive shaft is mounted on heavy duty roller bearing sets, lubricated with grease or oil. Like the linear vibratory screens, circular vibrating screens are mounted on reinforced rubber springs to prove the same benefits in performance and longer lifespan.

What Should We Pay Attention to the Selection of Vibrating Screen Coupling

Vibrating screen coupling is commonly used in mechanical transmission components. It is used to put two shaft coupling together, a component which cannot separate with rotation and transmission torque of two shafts when the vibrating screen is running; only after the machine stop and after joint apart, two shafts can be separated. Coupling is a kind of standard part, when using we can choose coupling according to the requirements of national standards and the using requirements.

 

Due to the manufacturing and installation error, two shafts of coupling connection may occur deformation after bearing and the influence of temperature change, often cannot guarantee strict centring, however, there is some degree of relative displacement. So choose cross coupling between the reducer and the clutch, oldham coupling is composed of two end surface fluted half coupling and the middle plate of protruding teeth both sides. Because convex teeth can slide in groove, so it can compensate for the relative displacement between the two shafts in installation and operation. This kind material of coupling parts can be available for 45# steel, work surface needs heat treatment to improve its hardness. It is also available for Q275 steel when the requirement is lower, no heat treatment is required. In order to reduce friction and tear, when using we should lubricate from the oil hole in the middle.
Because sliding pair is consist of half coupling and the middle plate, which can't occur relative rotation, therefore, angular velocity of the drive shaft and the driven shaft should be equal. But when there are relative displacement between the two shafts, middle plate will generate a lot of centrifugal force, which will increase the dynamic load and wear. Therefore when we choose coupling, we should pay attention to that working speed shall not be greater than the specified value. 

Introduction of Gyratory Vibrating Screen

►Customer reference list

CUSTOMER REFERENCE LIST (YEAR 2012-2014)
NO.	EQUIPMENT	VENDOR'S SCOPE OF SUPPLY	QUANTITY	TIME
		PROJECT LOCATION
13	Gyratory Screen	Srilanka	1 Set	20121024
25	Gyratory Screen	Australia	1 Set	20130800
33	Gyratory Screen	Iran	1 Sets	20140129
40	Gyratory Screen	Guyana	6 Sets	20140500
43	Gyratory Screen	Srilanka	1 Set	20140700

►IntroductionGyratory Screen is a new developed equipment particularly for urea .The main function is to provide accurate separation of materials without product deterioration, thereby resulting greater product yields at higher production rates. This machine consists of top cover, top screen fame, spacer, bottom screen fame, the base space and the screen box. The unique gyratory motion of the near horizontal screen surface and the available screen mesh cleaning system secure the gyratory vibrating screen quality as a high capacity product that efficiently developed for materials screening purposes. 

gyratory vibrating screen

► Application

As one of new type and high standard screening equipment, gyratory screen can be used to screen of raw materials and bean curd in large scale grease factory, and screen or classify large granular urea, powder materials or granulated feed in feed mill. Also, it can be used for preliminary cleaning of raw material in feed mill as well as classifying intermediate products after regrinding in middle-sized feed mill. What's more, gyratory screen can be widely used to screen and classify materials or finished products for grain, sodium bicarbonate, large granular urea, urea granules, ceramsite, zirconia, reduced iron powder, barite, spice, plastic, mining industry, rubber, wood industry, plywood, medicine, sugar, mining, papermaking, chemical, refractory materials, building materials, activated carbon, food, PVC powder and other fine materials etc..With the development of market circulation economy, it is increasing to be used in waste plastic industry to classify, and also can do size grading for materials with broken.

gyratory vibrating screen motor

► Working principle
Gyratory screen adopts to Rotex technology,we also call it Rotex screen. which obviously improves the distribution of the material, thus it will enhance the screening efficiency and the effective utilization of the screen surface, also reduce the powder content of the final material .This design is totally enclosed without dust pollution,it not only improve the operation environment but also reduce the dynamic ratio and foundation load effectively.