2016年1月5日星期二

How to debug linear vibration sieve?

1. Linear vibrating screen generally adopts three-phase alternating current. Please ensure correct power supply connection ,no conductive material, specialized alternating current socket.
2. The base must be fixed firmly by bolt to guarantee a same height difference front and back supporting seat , the feeding end and discharge end in a horizontal plane, otherwise screening effect will not reach the requirements of qualified products.
3. Check the flatness of screen mesh, ensure screen mesh is installed on the frame correctly, keep the screen mesh in the same horizontal plane to prevent screen tilt, and screening materials not up to the ideal state.
4. Check the each component of linear vibrating screen to ensure they’re firm and reliable, all the bolts must be tightened without looseness.
5. Ensure there is 30-50mmgap between linear vibrating screen and the surrounding fixtures, and check whether screw is locked well or not.
6. Take off the transportation support before starting up the linear vibrating screen, and add the support again until the vibrating screen operation becomes normal.
7. Pay attention to observe the material trajectory after starting up, adjust the screening state according to the material screening trajectory. 

没有评论:

发表评论